
New TopShim run:

version = topshim 2.4.0
date = 2026-10-30
time = 12:56:22.029
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before= 0.4 Hz, Target= 0.3 Hz, After= 0.4 Hz
Iteration  2: FWHM Before= 0.4 Hz, Target= 0.2 Hz, After= 0.6 Hz
Iteration  3: FWHM Before= 0.6 Hz, Target= 1.7 Hz, After= 1.4 Hz
Iteration  4: FWHM Before= 1.4 Hz, Target= 1.2 Hz, After= 1.8 Hz
Iteration  5: FWHM Before= 1.8 Hz, Target= 0.9 Hz, After= 1.0 Hz
Iteration  6: FWHM Before= 1.0 Hz, Target= 1.2 Hz, After= 1.9 Hz
Iteration  7: FWHM Before= 1.9 Hz, Target= 1.1 Hz, After= 2.2 Hz
Iteration  8: FWHM Before= 2.2 Hz, Target= 0.2 Hz, After= 2.5 Hz
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 0.918

shim changes: 
Z	-996
Z2	-1122
Z3	-1139
Z4	-677

duration = 7 min 13 sec
completed successfully
finished Fri Oct 30 13:03:33 2026


========================================================================
