
New TopShim run:

version = topshim 2.4.0
date = 2026-10-27
time = 19:28:39.571
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before= 0.3 Hz, Target= 0.3 Hz, After= 0.4 Hz
Iteration  2: FWHM Before= 0.4 Hz, Target= 0.4 Hz, After= 1.1 Hz
Iteration  3: FWHM Before= 1.1 Hz, Target= 0.4 Hz, After= 1.1 Hz
Iteration  4: FWHM Before= 1.1 Hz, Target= 0.3 Hz, After= 0.6 Hz
Iteration  5: FWHM Before= 0.6 Hz, Target= 0.4 Hz, After= 0.8 Hz
Iteration  6: FWHM Before= 0.8 Hz, Target= 0.4 Hz, After= 1.1 Hz
Iteration  7: FWHM Before= 1.1 Hz, Target= 0.3 Hz, After= 0.9 Hz
Iteration  8: FWHM Before= 0.9 Hz, Target= 0.3 Hz, After= 1.1 Hz
Iteration  9: FWHM Before= 1.1 Hz, Target= 0.7 Hz, After= 1.3 Hz
Iteration 10: FWHM Before= 1.3 Hz, Target= 0.3 Hz, After= 1.1 Hz
Iteration 11: FWHM Before= 1.1 Hz, Target= 1.0 Hz, After= 1.6 Hz
Iteration 12: FWHM Before= 1.6 Hz, Target= 0.7 Hz, After= 0.6 Hz
Iteration 13: FWHM Before= 0.6 Hz, Target= 0.4 Hz, After= 1.0 Hz
Iteration 14: FWHM Before= 1.0 Hz, Target= 0.4 Hz, After= 1.1 Hz
Iteration 15: FWHM Before= 1.1 Hz, Target= 0.4 Hz, After= 0.8 Hz
RMSD between target and map above threshold but maximum number of iterations reached. Halting shimming.

Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 1.13

shim changes: 
Z	+358
Z2	-371
Z3	-303
Z4	+1422

duration = 11 min 49 sec
completed successfully
finished Tue Oct 27 19:40:27 2026


========================================================================
