
New TopShim run:

version = topshim 2.4.0
date = 2026-09-28
time = 16:17:14.195
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
echo time must be reduced
echo time must be reduced
Iteration  1: FWHM Before= 7.1 Hz, Target= 0.3 Hz, After= 1.0 Hz
Iteration  2: FWHM Before= 1.0 Hz, Target= 0.3 Hz, After= 1.3 Hz
Iteration  3: FWHM Before= 1.3 Hz, Target= 0.5 Hz, After= 1.9 Hz
Iteration  4: FWHM Before= 1.9 Hz, Target= 0.2 Hz, After= 2.1 Hz
Iteration  5: FWHM Before= 2.1 Hz, Target= 1.4 Hz, After= 1.7 Hz
Iteration  6: FWHM Before= 1.7 Hz, Target= 0.2 Hz, After= 2.9 Hz
Iteration  7: FWHM Before= 2.9 Hz, Target= 2.4 Hz, After= 2.7 Hz
Iteration  8: FWHM Before= 2.7 Hz, Target= 2.4 Hz, After= 2.1 Hz
Iteration  9: FWHM Before= 2.1 Hz, Target= 2.0 Hz, After= 2.8 Hz
Iteration 10: FWHM Before= 2.8 Hz, Target= 1.7 Hz, After= 1.4 Hz
Iteration 11: FWHM Before= 1.4 Hz, Target= 0.2 Hz, After= 0.5 Hz
Iteration 12: FWHM Before= 0.5 Hz, Target= 1.8 Hz, After= 3.7 Hz
Iteration 13: FWHM Before= 3.7 Hz, Target= 0.3 Hz, After= 2.6 Hz
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 1.68

shim changes: 
Z	-6814
Z2	-13665
Z3	-30786
Z4	-42665

duration = 11 min 20 sec
completed successfully
finished Mon Sep 28 16:28:32 2026


========================================================================
