
New TopShim run:

version = topshim 2.4.0
date = 2026-10-30
time = 16:13:57.251
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
Iteration  1: FWHM Before= 2.8 Hz, Target= 1.6 Hz, After= 2.4 Hz
Iteration  2: FWHM Before= 2.4 Hz, Target= 0.4 Hz, After= 3.1 Hz
Iteration  3: FWHM Before= 3.1 Hz, Target= 0.7 Hz, After= 2.0 Hz
Iteration  4: FWHM Before= 2.0 Hz, Target= 0.5 Hz, After= 2.0 Hz
Iteration  5: FWHM Before= 2.0 Hz, Target= 2.1 Hz, After= 2.5 Hz
Iteration  6: FWHM Before= 2.5 Hz, Target= 2.2 Hz, After= 1.6 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 1.46

shim changes: 
Z	+384
Z2	-455
Z3	+2541
Z4	-8659

duration = 4 min 19 sec
completed successfully
finished Fri Oct 30 16:18:15 2026


========================================================================
