
New TopShim run:

version = topshim 2.4.0
date = 2026-09-30
time = 21:12:03.200
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
echo time must be reduced
Iteration  1: FWHM Before= 7.5 Hz, Target= 0.2 Hz, After= 0.6 Hz
Iteration  2: FWHM Before= 0.6 Hz, Target= 1.0 Hz, After= 1.1 Hz
Iteration  3: FWHM Before= 1.1 Hz, Target= 0.2 Hz, After= 0.9 Hz
Iteration  4: FWHM Before= 0.9 Hz, Target= 1.6 Hz, After= 2.5 Hz
Iteration  5: FWHM Before= 2.5 Hz, Target= 1.6 Hz, After= 0.9 Hz
Iteration  6: FWHM Before= 0.9 Hz, Target= 2.3 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 1.56

shim changes: 
Z	-2386
Z2	-4741
Z3	-11986
Z4	-18809

duration = 4 min 44 sec
completed successfully
finished Wed Sep 30 21:16:45 2026


========================================================================
