
New TopShim run:

version = topshim 2.4.0
date = 2026-10-28
time = 13:33:44.012
command = topshim  convcomp ordmax=4

FINE SHIMMING

Parameters:

probe = Z104275_0310
solvent = CDCl3
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 7.24 ppm

Results:


1D Shimming:
Low S/N encountered. The acquisition parameters will be changed to improve this issue.
echo time must be reduced
Iteration  1: FWHM Before= 2.5 Hz, Target= 0.3 Hz, After= 0.7 Hz
Iteration  2: FWHM Before= 0.7 Hz, Target= 0.9 Hz, After= 0.6 Hz
Iteration  3: FWHM Before= 0.6 Hz, Target= 0.2 Hz, After= 2.4 Hz
Iteration  4: FWHM Before= 2.4 Hz, Target= 0.2 Hz, After= 1.6 Hz
Iteration  5: FWHM Before= 1.6 Hz, Target= 2.7 Hz, After= 3.5 Hz
Iteration  6: FWHM Before= 3.5 Hz, Target= 2.6 Hz, After= 3.4 Hz
Iteration  7: FWHM Before= 3.4 Hz, Target= 2.2 Hz, After= 3.0 Hz
Iteration  8: FWHM Before= 3.0 Hz, Target= 2.0 Hz, After= 2.9 Hz
Shim succeeded

Lineshape quality factor (1D spectrum, spinning) = 2.14

shim changes: 
Z	-1454
Z2	-2696
Z3	-8895
Z4	-18344

duration = 5 min 45 sec
completed successfully
finished Wed Oct 28 13:39:27 2026


========================================================================
